Blastwirx | Seaguard Film Galvanizing System

Blastwirx

Model BWI-700 Specifications

Capacity

  • Required air compressor size: 200 – 500 CFM @ 100 psig of compressed air
  • Grit Holding Capacity – Blast Pot: 5.5 cu. ft. for grit, 1.1 cu ft. for water
  • Fresh water storage: 110 US Gallons

Features

  • 7.6 cu.ft . ASME certified custom blast pot - powder coated inside & out
  • Protective pot - fill guard ring with grit level test port
  • Durable powder - coated exterior finish
  • Duplex pneumatic & 12vdc electric deadman controls
  • Single Emergency Stop switch with STOP/RUN annunciators; operates both pneumatic or electric deadman conrol
  • Dual Pumps - Separate & Independent pumps for filling vs blasting
  • Direct Injection wash down feature with near instant response
  • Pinch-to-rinse wash down logic saves BIG on slurry hose ball valve wear.
  • Color coordinated control tubing for effortless trouble shooting

Structure

  • Heavy Duty structural steel skid with heavy wall ¼” thickness square and rectangular tubing
  • Reinforced water tank mounting struts
  • 4” x 10” Fork pockets
  • Engineered Lifting Eyes

Consumption

  • Grit 1-2 cu ft/hr average
  • Water - Blasting - approximately 1 quart / minute or 15 gallons /hr
  • Water - Rinsing - approximately 2 quarts / minute
  • Compressed Air – 200 - 500 cfm @ 100 psig continuous

Included Accessories

  • 50’ x 1 ¼” ID 2 - ply blast hose with hose coupling and nozzle holder
  • 50’ 3/16” twinline pneumatic deadman hose
  • #8 high - performance nozzle
  • (Other nozzles available for substitution)

Optional Accessories

  • 50’ sections 3/16” twinline hose extensions
  • 50' 1¼" ID 2-ply blast hose extensions w/ coupling adapters on both ends
  • Additional nozzle sizes and styles

Dimensions

  • 35” wide x 70” long x 53” tall

Weight

  • 1200# Dry Tare Weight
  • *2900# Operational weight – Estimated Average

*NOTE: Operational weight determined using available capacity of 5.5 cu ft. of garnet blasting media.
(Average wt. of 130#/cu ft for garnet x 5.5 cu ft =715# + 110 gallons of fresh water x 8.33#/gal = 916#.)
(1200# tare + 715# garnet + 916# water = 2813# total.)


BlastWirx Micro Specifications

Capacity

  • Required air compressor size: 20-150 CFM @ 100 psig of compressed air (#2, #3 or #4 nozzle)
  • Grit Holding Capacity – Blast Pot: 1.0 cu ft.
  • Fresh water storage: 25 US Gallons

Features

  • Extreme reliability 12 vdc electric pump
  • Digital dual Voltage and Amp meter to monitor electrical demand
  • Circuit breaker electrical protection
  • EZ Purge grit holding tank with Pressure Relief Valve and fill funnel
  • Corrosion Resistant Zinc, Brass and Stainless components throughout
  • Pneumatic deadman controls
  • Emergency Stop switch
  • Direct Injection wash down feature with near-instant response
  • Pinch-to-rinse wash down logic saves BIG on slurry hose ball valve wear.
  • Color coordinated control tubing for effortless troubleshooting

Structure

  • Heavy Duty Steel Structure (Vapor blasted then decontaminated with CleanWirx process with 2 coats of epoxy primer with polyurethane epoxy top coat)
  • Center Lifting Eye for single point lifting
  • Standard sized 2” x 6” rectangular tubing for forklifting
  • Skids pre-drilled for optional casters

Consumption

  • Grit .5 cu ft/hr average (# 3 nozzle @100 psi=45 cfm)
  • Water - Blasting - approximately 1 pints/minute or 7.5 gallons/hr – (finer grits use less water)
  • Water - Rinsing - approximately 2 quarts/minute
  • Compressed Air – 20 - 150 cfm @ 100 psig continuous (blast hose and nozzle size must be properly sized according to the available air compressor cfm)

Included Accessories

  • 48’ x 1/2” ID 4-ply blast hose with hose coupling and nozzle holder
  • 50’ 5/32” twinline bonded pneumatic deadman tubing
  • #3 high-performance aluminum nozzle (Other nozzles available for substitution.)

Optional Accessories

  • 50’ sections 5/32” twinline hose extensions
  • 50' 1/2" ID 4-ply blast hose extensions w/ coupling adapters on both ends
  • Additional nozzle sizes and styles
  • Casters

Dimensions

  • 26” wide x 36” long x 29.5” tall

Weight

  • 160# Dry Tare Weight
  • *475# Operational weight – Estimated Average

*NOTE: Operational weight determined using available capacity of 1.0 cu ft. of garnet blasting media.
(Average wt. of 110#/cu ft for garnet x 1.0 cu ft =110# + 25 gallons of fresh water x 8.33#/gal = 208.25#.)
(160# tare + 110# garnet + 208.25# water = 478.25# total.)